Elite Software Mega Post

Audit v7.01.87 + Patch
Displays and prints Print Preview reports generated by Elite Software Programs.

http://rapidshare.com/files/31441173/EliteSoftwareAudit70187.rar

D-Pipe v2.00.8 + Patch [Drainage Pipe and Vent Sizing]
Whether you need to size drainage pipes and vents according to UPC, IPC, or your own custom standard, D-Pipe is ready to adapt to your needs. In fact, you can define and keep on hand as many different sizing code files as you like.
Features
* Calculates optimal drainage pipe and vent sizes
* Follows methodology described in the ASPE Databook
* Sizes pipe according to UPC and IPC code requirements
* Provisions for sizing in accordance with local codes
* Prints bill of materials with material and labor costs
* Built-in pipe, fitting, and drainage fixture data
* Links to Autodesk Building Systems 2006
* Allows for all types of pipe materials
* Fitting and fixture data can be edited by the designer
* Allows multiple pipe, fitting, and fixture library files
* Instantaneous input error checking
* Provides comprehensive and concise reports

http://rapidshare.com/files/31443070/EliteSoftwareDPipe2008.rar

Ductsize v6.01.152 + Patch [HVAC Duct Sizing and Analysis]
Ductsize lets you create a complete duct system from start to finish, and gives you control over every aspect of the design. You can let the program size all the ducts for you (using three different sizing methods), or enter your own sizes to analyze an existing design. Or you can do any combination of the two, where you specify the duct sizes through tight areas where there is little room for ductwork, and let the program calculate the sizes everywhere else. If you are an engineer or HVAC designer who wants to step up to the ultimate in a duct sizing program, then Ductsize is for you.
Features
* Calculates optimal air conditioning duct sizes.
* Computes round, rectangular, & flat oval duct sizes.
* Four sizing methods available: Static Regain, Equal Friction, Constant Velocity, and As Built ("Presize").
* Links to Autodesk Building Systems 2006 and 2007, and soon with AutoCAD MEP 2008 (Static Regain version only).
* Includes a built-in fan library for noise calculations.
* Fitting Selector displays drawings of over 190 ASHRAE duct fittings, now inclding return fittings.
* Project Explorer provides a tree-style graphical representation of all trunks & runouts in the project.
* Includes Duct Connection Tree Diagram report, a concise, graphical report to give the installer.
* Both supply and return duct systems can be entered in the same project. Return-side duct system losses are automatically accounted for when calculating the supply-side duct system.
* The number of trunks & runouts is virtually unlimited.
* Calculates from manually entered data or directly from duct drawings created with Drawing Board (sold separately).
* Trunks and runouts are each given a user defined name instead of just a number. Trunk and runout names can be changed at any time.
* A virtually unlimited number of separate duct systems can be entered in a single project.
* Provides comprehensive color reports which can be printed, previewed on screen and saved to disk.
* Determines noise levels and required attenuation.
* Reports can optionally be generated as HTML file.
* Reports can optionally be generated as an RTF file (for Microsoft Word) or a PDF file (for Adobe Reader).
* Uses ASHRAE and SMACNA procedures.
* Uses either English or metric units.
* Includes customizable toolbar and menu to fit your work style.

http://rapidshare.com/files/31435555/EliteSoftwareDuctsize601152.rar

Electrical Tools v1.01.4 + Patch & Keygen [Collection of Electrical Utilities]
There’s no question about it if you’re an electrical engineer or designer, Electrical Tools is a must-have program.
Features
* Automates 14 electrical calculation & data look-up tasks
* Follows NEC and IES procedures
* Sizes wire based on ampacity and % voltage drop
* Sizes conduits
* Calculates voltage drop for up to five components
* Calculates short circuit for up to five nodes
* Calculates single room luminaire requirements
* Reads and converts IES photometric data files
* Sizes service entrance panel equipment
* Sizes motor equipment
* Sizes power factor correction capacitors
* Performs current to power conversions
* Automatic Ohm’s Law calculator
* Quick look-up of common electrical formulas
* Quick look-up of conductor resistance & reactance
* Provides comprehensive and concise reports

http://rapidshare.com/files/31436360/EliteSoftwareE-Tools1014.rar

Fire v6.0.167 + Patch & Keygen [Fire Sprinkler System Design]
For over a decade, the Fire program has earned a reputation among professional engineers and designers as a best buy among programs of its kind. They demand a full set of features, a user-friendly interface, and an affordable price. And Fire delivers it all.
Features
* Performs hydraulic calculations following NFPA 13
* Handles sprinkler systems with up to 1,000 sprinklers
* Works on trees, grids, and hybrid sprinkler systems
* Uses English or metric units
* Tree Grid Pipe Network Builder included
* Links to Autodesk Building Systems 2006 and 2007 (1000 Node version only)
* Computes flow rates, velocities, & pressure drops
* Automatically sizes pipe
* Analyzes stand pipe systems
* Prints supply/demand graph on screen & printer
* Allows for all types of pipe materials
* Automatically calculates fitting equivalent lengths
* Provides comprehensive NFPA style, high quality color presentation reports

http://rapidshare.com/files/31443136/EliteSoftwareFIRE60167.rar

GasVent v2.09.1 + Patch [Gas Vent Sizing]
Since there are so many potential problems that can result from the incorrect venting of gas appliances, some of them deadly, as a contractor you simply cannot afford to do without the kind of design help that GasVent gives you.
Features
* Calculates Vent Size for Category 1 Gas Powered Appliances
* Follows NFGC and IFGC Procedures
* Sizes Single and Double Wall Metal Vents
* Computes Combustion Air Requirements
* Calculates Interior or Exterior Masonry Chimney Size
* Sizes Type B and Single Wall Metal Vent Connectors
* Calculates for Single and Multiple Appliances
* Works for Both Single and Multi Story Buildings
* Allows for Drafthood and Fan Equipped Appliances
* Accommodates Single Stage or Multiple Stage Appliances
* Accommodates any Height and Lateral Dimensions
* Accommodates 45 Degree and 90 Degree Vent Elbows
* Accommodates Corrugated Vent Connectors
* Accommodates Vent Dampers
* Graphical, Context Sensitive Help
* Hypertext Feature Provides Link Between All Help Items

http://rapidshare.com/files/31443861/EliteSoftwareGASVENT2091.rar

HVAC Tools v3.2.14 + Patch [Collection of HVAC Utilities]
What are two things you’ve got to have to build something? Answer: know-how and tools. Know-how doesn’t do you much good if you don’t have the tools for the job. The same goes for designing things in the world of HVAC. What’s in your HVAC toolbox? Add HVAC Tools to it today and get the job done right.
Features
* Automates 13 Common HVAC Design Tasks
* Follows ASHRAE and NEC Procedures
* Sizes Round and Rectangular Duct Sections
* Sizes Wire Based on Ampacity and % Voltage Drop
* Sizes Pipes and Refrigerant Lines
* Performs Fan Curve and Cost Analysis
* Supports both English (IP) and Metric (SI) units
* Performs Mixed Air and State Point Psychrometrics
* Performs Three Way Interpolation of HVAC Units
* Automatic U-Factor Calculations for Roofs, Walls, etc.
* Hot and Chilled Water Pipe Sizing and Analysis
* High and Low Pressure Natural Gas Pipe Sizing
* Quick Look-Up of Common HVAC Formulas
* Provides Comprehensive and Concise Reports

http://rapidshare.com/files/31443935/EliteSoftwareHTOOLS3214.rar

Refrig v3.00.63 + Patch & Keygen [Refrigeration Box Loads]
Getting the precise load can be critical for refrigeration applications, so using a program that is tried and true and that covers every detail is essential. Try Refrig today and see why it has been the choice of many professional engineers for over a decade.
Features
* Calculates 24 Hour Total Refrigeration Loads
* Appropriate for All Refrigeration Applications
* Uses Exact ASHRAE Procedures
* Accounts For All Types of Loads Including Exterior, Internal, Product, Defrost, Compressor Run-time, etc.
* Continuous Display of Load Totals On Input Screens
* Automatic Look-Up of Design Weather Data
* Contains Built-in Library of Product Load Data
* Includes Built-in Library of Coils & Condensing Units
* Allows Mixing & Matching of Coils & Condensing Units
* English or Metric Units

http://rapidshare.com/files/31439361/EliteSoftwareRefrig30063.rar

S-Pipe v2.00.24 + Patch [Service Supply Pipe Sizing]
If you’re looking for a full featured domestic supply water pipe sizing program then S-Pipe is what you want. It has lots of built-in pipe and fitting data, plus the flexibility to let you enter your own data, plus a direct link with Autodesk Building Systems.
Features
* Sizes both hot and cold water supply systems
* Calculates using ASHRAE and ASPE procedures
* Supports all plumbing codes such as UPC, IPC, etc.
* Computes demand GPM quantities, pipe specific and total accumulated pressure drops and velocities
* Includes a single branch sizing calculator
* All input data is checked as you enter it
* Built-in data for pipes, fittings, and fixtures
* Links to Autodesk Building Systems 2006
* Prints bill of materials with labor costs
* All built-in data can be changed by the user
* Uses Hunter GPM Curve or your own
* Allows for all types of pipe materials
* Calculates demand water pressure and flow rates
* Computes fitting equivalent lengths & fixture unit loads

http://rapidshare.com/files/31444669/EliteSoftwareSPIPE20024.rar

Password for all files is:
Website
www.elitesoft.com/